Support Portal

Use manual zones | Divide field to multiple sections

While drawing a field, if you turn ON the Manual zoning toggle, you will be asked to zone your field:

Screen_Shot_2017-07-27_at_12.08.55_PM.png

  • Click on the POLYLINE button to enable zoning
     Screen_Shot_2017-07-27_at_12.09.09_PM.png
  • From OUTSIDE of your drawn field pull a straight line to divide the section you want to zones. Pull the line to the other end also OUTSIDE of field. Double click to finish edit.
    Screen_Shot_2017-07-27_at_12.13.53_PM.png
  • Click APPLY to save changes
    Screen_Shot_2017-07-27_at_12.14.12_PM.png

  images.png  You can add more zones by repeating these steps as much as needed

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request